PRODUCTS

Pellet Drying Machine


Biomass Pellet Drying Machine
For producing good quality briquettes with high density, it is very importance to control the moisture contact of raw material to 8-12% before loading them into briquette machine. Thusdrying is important for the proper preparation, and the raw material should be dried before briquetting.

This machine is consisted by fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock. Wet material is loaded into machine, , mixed by screw feeding machine, and mixed with hot air produce by fuel furnace, and move though the curving pipes under the action of exhaust fan. Moisture evaporates as the raw material travels alone the pipes. It is released by cyclone at the end. 

It is simple design & high effect, low energy consumption & cost compared with rotary dryer. Suitable fuels for the boiler are wood waste, coal, firewood, etc.

Pellet Drying Machine Suggestion
For HGJ-D4 & HGJ-D7, it is suitable for drying material with moisture content less than 35%, if the moisture is high, it need 2-3 times to dry.

For HGJ-S7, HGJ-S11 & HGJS15, it is suitable for drying material with moisture content less 50%, if the moisture is less than 35%, it only need to heat the first stove, no need to heat the second.

Specification and Technology Data

Model

HGJ-D4

HGJ-D7

HGJ-S7

HGJ-S11

HGJ-S15

Capacity

200-250 kg/h

500-700 kg/h

400-500 kg/h

500-700 kg/h

1000-1200 kg/h

Input material moisture

35%

35%

50%

50%

50%

Power

4 kw

11 kw

7.5+1.5+1.5 kw

11+0.75+0.75 kw

15+1.5+0.75 kw

Input material diameter

5 mm

5 mm

5 mm

5 mm

5 mm

Hot air temperature

180-250°C

180-250°C

180-250°C

180-250°C

180-250°C

Wood waste consumption

15-20 kg/h

25-30 kg/h

30-35 kg/h

35-40 kg/h

40-45 kg/h